Sketch: WORKING PRINCIPLEThe mixer body will parallel moving, rotating, and rolling with the driving of main shaft, and the materials will reacts 3D motions (circle, radial and axial direction) along the wall to realize the mutual flow, diffusion, accumulatio…
View MoreSketch: WORKING PRINCIPLEEYH Series 2D Motion Mixer consists of three main parts, which are rotating cylinder, swinging rack and frame. The rotating cylinder lies on the swinging rack and supported by four wheels, and its axial fixation is done by two stop-wh…
View MoreSketch: CharacteristicsThe structure of mixing barrel is unique and the mixing efficiency is high and no dead corners. The barrel is made of stainless steel with polished treatment so the appearance is beautiful. The mixing uniformity is good and it has a wid…
View MoreSketch: DESCRIPTIONThe helix rotates and pushes the material to create a composite motion inside of the cone. The main motion types are:1. Orbit rotation along the wall and push the material in a circular motion;2. Spin rotation to push the material rise up f…
View MoreSketch: FEATURES1. The powder or granule material is fed into the double cone container through the vacuum conveyor or manually. The double cone container is rotating continuously to create the compound crushing motion until the material is mixed uniformly.2.…
View MoreSketch: WORKING PRINCIPLEThis machine consists of container, screw stirring paddles and transitional parts; the screw paddle usually has 2 or 3 layers, the outer screw will push the material from the sides to the center, and the inner screw will push the mate…
View MoreSketch: WORKING PRINCIPLEWZ Series Zero-Gravity Mixer is a strong and high efficiency mixing machine. It has two mixing axles rotate reversely at an identical revolution in the horizontal drum body. The paddles are distributed on the axles to ensure that the …
View MoreSketch: DESCRIPTIONIt is particularly suitable for mixing powder or damp materials that required high uniformity and high specific gravity.FEATURES1. The raw materials contact area is made by stainless steel.2. The gap between machine body and blades is small…
View More